The UK's largest and most comprehensive exhibition for the surface coatings, printing inks, adhesives, corrosion and construction chemicals industries, SURFEXPlus, is relocating to The NEC Birmingham

[Read the rest of this article...]

IP theft in China is a serious issue. Are American companies turning a blind eye to the IP theft issue due to the fact that they are making huge profits in China?

[Read the rest of this article...]

H.C. Starck Inc., Fabricated Products Group, a global supplier of refractory materials and fabricated products will exhibit at the upcoming NACE CORROSION 2011 in Houston, TX, March 14-17 featuring its Ultra 76 Tantalum alloy

[Read the rest of this article...]

PPG Industries will showcase advanced architectural glasses and coatings at the 2011 American Institute of Architects' Convention in New Orleans, May 12-14, booth 1635

[Read the rest of this article...]

[Read the rest of this article...]

[Read the rest of this article...]

[Read the rest of this article...]

K. Videm
Experiments with a simple bridge for the determination of polarization resistance, electrode capacitance, and time constant of corroding electrodes are presented. The novelty is the use of low-frequency square waves (e.g., 10 mHz, 5 mV peak-to-peak) impressed on the specimens via capacitors in par ... [Corrosion 67, 045002 (2011)] published Fri Apr 01, 2011.

[Read the rest of this article...]

X. Yong, C. Hou, and J. Wu et al.
Electrochemical polarization, scanning electron microscopy, and atomic force microscopy (AFM) techniques were used to study the mechanism of cavitation corrosion for anodized aluminum alloy in 3.5% sodium chloride (NaCl) solution. It was found that the anodized film was eroded from the porous oute ... [Corrosion 67, 045003 (2011)] published Fri Apr 01, 2011.

[Read the rest of this article...]

T. F. Fontes, R. Magnabosco, and M. Terada et al.
Alpha prime formation leads to material embrittlement and deterioration of corrosion resistance. In the present study, the mechanical and corrosion behavior of super duplex stainless steel UNS S32520 aged at 475°C from 0.5 h to 1,032 h was evaluated using microhardness measurements, Charpy impact ... [Corrosion 67, 045004 (2011)] published Fri Apr 01, 2011.

[Read the rest of this article...]