Corrosion

News Articles


Corrosion

NO Image:
01
T. Nickchi and A. Alfantazi
Electrochemical corrosion behavior of Alloy 800 (UNS N08800) in sulfate solution was compared in the presence and absence of potassium phosphate monobasic/sodium hydroxide (KH2PO4/NaOH) buffering reagent. Cathodic polarization, cyclic voltammetry, and electrochemical impedance spectroscopy were us ... [Corrosion 68, 015003 (2012)] published Sun Jan 01, 2012.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01
A. S. Fouda and H. M. El-Abbasy
The effect of ampicillin and benzyl penicillin drugs on the corrosion behavior of Type 304 (UNS S30400) stainless steel in 1.0 M hydrochloric acid (HCl) solution has been investigated using weight-loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques. The ... [Corrosion 68, 015002 (2012)] published Sun Jan 01, 2012.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01
S. Xiong, Z. Zhu, and H. Zhang et al.
This study investigates the influence and mechanism of SO42− ions on the pitting corrosion of boiler water-wall tubes. The kinetics of SO42− ions on pitting corrosion was assessed by mass gain rate and depth gain. Sample surfaces were examined using transmission reflection metallurgical microscopy ... [Corrosion 68, 015001 (2012)] published Sun Jan 01, 2012.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01
M. Momeni, A. Ale-yassin, and M. H. Moayed
In this study, a new solution based on hydrochloric acid (HCl) and sodium thiosulfate (Na2S2O3) has been developed for detecting and measuring degree of sensitization (DOS) using the double-loop electrochemical potentiodynamic reactivation (DL-EPR) method. Two types of stainless steels including T ... [Corrosion 68, 015007 (2012)] published Sun Jan 01, 2012.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01
V. G. Silva, S. S. M. Tavares, and I. P. Baptista et al.
The usage of superduplex stainless steels in offshore petroleum production has increased considerably in the last years. Particularly, the use as flowline pipes for oil production needs careful research on the effect of critical environmental conditions on the stress corrosion resistance of welded ... [Corrosion 68, 015006 (2012)] published Sun Jan 01, 2012.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01
S. Song, G. -L. Song, and W. Shen et al.
The electrochemical corrosion performance of E-coated, which is also known as electro-coated or electrophoresis-coated (a process of using direct current to deposit an organic coating), and powder-coated magnesium alloys AZ31 and AZ61 was investigated using AC/DC/AC (alternating current/direct cur ... [Corrosion 68, 015005 (2012)] published Sun Jan 01, 2012.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01
H. S. Klapper, R. Baessler, and K. Weidauer et al.
In the last years, geothermal power has become a reliable and significant energy source. Because service conditions in geothermal facilities from deeply located aquifers are usually critical in terms of corrosion, materials selection is a very important issue. Preliminary evaluation of the materia ... [Corrosion 68, 016001 (2012)] published Sun Jan 01, 2012.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01
S. Thomas, N. Birbilis, and M. S. Venkatraman et al.
Anodic and cathodic polarization of zinc was carried out in 0.1 M sodium chloride (NaCl) solution with pH ranging from 1 to 13. The electrochemical data was then contrast to thermodynamic chemical equilibrium diagrams. The analysis shows that, in general, variations in corrosion of zinc with pH ar ... [Corrosion 68, 015009 (2012)] published Sun Jan 01, 2012.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01
B. Ramezanzadeh and M. M. Attar
St-37-type steel samples were pretreated with Cr(III) and Cr(VI) conversion coatings (CC). The Cr(III) pretreated samples were then posttreated by Co(II) and Ni(II) CC. The corrosion resistance of the samples was studied using direct current (DC) polarization technique and electrochemical impedanc ... [Corrosion 68, 015008 (2012)] published Sun Jan 01, 2012.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
01

Abstract not available. [Corrosion 68, 019001 (2012)] published Sun Jan 01, 2012.

[Read the rest of this article...]

Posted in: Corrosion
Actions: E-mail | Permalink |
Page 3 of 18First   Previous   1  2  [3]  4  5  6  7  8  9  10  Next   Last