Y. L. Chou, J. W. Yeh, and H. C. Shih
The effect of Mo from 25°C to 80°C on the pitting corrosion of the Co1.5CrFeNi1.5Ti0.5Mox alloys in chloride solutions was investigated. The values of critical pitting temperature (CPT) for the Mo-free alloy in 0.001, 0.01, 0.1, and 1 M sodium chloride (NaCl) are 80, 50, 30, and below 25°C, respec ... [Corrosion 67, 085002 (2011)] published Mon Aug 01, 2011.

[Read the rest of this article...]

P. Majumdar, S. B. Singh, and U. K. Chatterjee et al.
The corrosion behavior of Ti-35Nb-7.2Zr-5.7Ta (TNZT) and Ti-35Nb-7.2Zr-5.7Ta-0.5B (TNZTB) alloys subjected to different heat treatment conditions was investigated in Hank's solution. Depending on the heat treatment conditions, the micro-structure of the water-quenched, single-stage aged or duplex ... [Corrosion 67, 085001 (2011)] published Mon Aug 01, 2011.

[Read the rest of this article...]

RockSolid Floors® has released their Polyurea Diamond Coat™, the workhorse of their series of One Part Polyurea floor coatings. Diamond Coat's™ chemical and abrasion resistance, along with its incredible strength (20 times that of epoxy,) make it an ideal sealer or top coat in any concrete flooring project

[Read the rest of this article...]

H. S. Klapper, A. Burkert, and A. Burkert et al.
Surface treatments usually are used to modify the appearance and properties of stainless steel surfaces. Simultaneously, the corrosion resistance of the stainless steel surface being related intrinsically to the spontaneous formation of a passive layer also will be affected. In this respect, the i ... [Corrosion 67, 075004 (2011)] published Fri Jul 01, 2011.

[Read the rest of this article...]

P. Saura, E. Zornoza, and C. Andrade et al.
When chloride-induced corrosion takes place, a local acidification occurs at the corrosion pit. Therefore, it is necessary to study the performance of corrosion inhibitors in low-pH environments. Reinforcing steel bars have been exposed to solutions that simulate the electrolytic environment of co ... [Corrosion 67, 075005 (2011)] published Fri Jul 01, 2011.

[Read the rest of this article...]

G. M. Silva, A. Q. Bracarense, and M. M. A. M. Schvartzman
In pressurized water reactors (PWR), dissimilar metal welds are made to join the pressure vessels of low-alloy steel to pipes of stainless steel using Alloy 182 (UNS W86182) as a filler metal. However, it has been found that Alloy 182 is susceptible to intergranular environmentally assisted cracki ... [Corrosion 67, 076001 (2011)] published Fri Jul 01, 2011.

[Read the rest of this article...]

As home owners continue to slow spending and hold off on major home renovations in the Austin, Texas area, many are turning to their garages for the instant gratification they have been looking for

[Read the rest of this article...]

Will coat turbine house steel structure and six sets of boiler, turbine and generator

[Read the rest of this article...]

HGTV Home by Sherwin Williams is a new line of low odor paint.

[Read the rest of this article...]

Suit says retail outlet sold paint with excess VOC levels and misled customers.

[Read the rest of this article...]